Contents
At a glanceSide-by-side comparisonFit and van lengthFlexibilityCost and fittingStrengthOur verdictFAQsVan racking is often sold as single or double units. A single unit is usually about 1,000 mm wide, while a double is close to twice that, often as one frame. Both can do the same job, but they suit different vans and different ways of working. Many vans end up with a mix of both, so it helps to know the strengths of each.
This guide compares the two. We look at fit, cost, flexibility and fitting time, and explain why some trades prefer two singles side by side to one double. The right choice depends on your van length, the side door position and how often you change your setup. We also look at strength and how to fit each type safely. The right choice usually comes down to the length of your load floor and how much you carry.
At a glance
Single unit



Popular choices include the G-Rack 175kg 150cm Single Shelving Unit (£39.99), Whitmor Black Single Shelving Unit (£74.25) and MONZANA Silver Single Shelving Unit (£48.99).
See the whole single shelving units range.
Double unit



Popular choices include the SONGMICS Double Shelving Unit (£99.98), Himimi 54W Black Double Shelving Unit with Wheels (£149.99) and SONGMICS Black Double Shelving Unit (£99.99).
See the whole double shelving units range.
Side-by-side comparison
| Feature | Single unit | Double unit |
|---|---|---|
| Typical width | About 1,000 mm | About 2,000 mm or more |
| Best for | Small vans, short spaces | Mid-size and large vans |
| Flexibility | Easy to move or add to | Fixed layout |
| Cost per metre | Often slightly higher | Often slightly lower |
| Fitting | Light and easy to handle | Heavier, may need two people |
| Rigidity | Good when fixed well | Very rigid as one frame |
Fit and van length
A single unit fits almost any van, from a Berlingo to a Sprinter. It is the natural choice for short load spaces and for spots between the side door and the rear arch. You can place two singles apart to leave a gap for a door or a gas bottle holder.
A double unit suits a long, clear run of side wall, as in a Transit Custom L2 or a Sprinter. It covers more space with one frame and gives a neat, continuous look. Measure the clear length first, as wheel arches and doors can break up the run.
Flexibility
Singles are easy to rearrange. If you change trade, van or the way you work, you can move a single unit or add a drawer unit beside it. You can also take one with you to a new van more easily.
A double is less flexible, but some designs let you swap shelves and add dividers. If your work is settled and your van will not change soon, a double can make sense.
Cost and fitting
Per metre of shelving, doubles can be slightly cheaper because they share uprights. Singles need more frames and fixings for the same length.
Singles are lighter and easier to carry into the van, which helps if you fit them yourself. A double can be heavy and awkward, so you may need help. Check the fitting kit includes enough brackets for the full length.
Strength
A double unit fixed along its length is very rigid, which helps on rough roads. Singles fixed well are also strong, but each needs its own brackets.
Whichever you choose, keep heavy items on the lower shelves and check bolts after the first few weeks. Shelf load ratings are listed per shelf, so do not overload one because the unit as a whole feels strong.
Our verdict
Choose single units for small vans, broken-up wall space or if you like to change your layout. They are easy to fit and easy to move.
Choose a double unit if you have a long clear run of side wall and want a neat, rigid setup at a lower cost per metre. Many mid-size van owners use one double plus a single near the door.
Prefer to browse everything? Our full ranges of single shelving units and double shelving units have more sizes, finishes and price points than we could fit here.
Frequently asked questions
Can I fit two single units side by side?
Yes. Many vans use two singles side by side, sometimes with a small gap. This gives flexibility and can be easier to fit than one double. Use the right brackets so each is fixed firmly.
Will a double unit fit a Transit Custom L1?
Often yes, but check the clear length between the bulkhead and the rear doors, taking the side door and arches into account. Some owners prefer a single plus a drawer unit instead. Measure the wall length and wheel arch position before ordering, as these decide which combination fits.
Are double units stronger than singles?
A double unit is one frame, which can be very rigid. Singles fixed well are also strong. The shelf load ratings in each listing matter more than whether the unit is single or double. Fixings matter just as much as the frame.
Which is cheaper per metre?
Doubles are often slightly cheaper per metre, as they share uprights. Prices vary by brand and material, so compare the total cost for the length you need. Remember to add the cost of brackets and fixings to each option.